initial commitHEADmain

1 files changed, 91 insertions, 0 deletions

diff --git a/libraries/ESP_Async_WebServer/examples/RequestContinuation/RequestContinuation.ino b/libraries/ESP_Async_WebServer/examples/RequestContinuation/RequestContinuation.ino
new file mode 100644
index 0000000..0584cf1
--- /dev/null
+++ b/libraries/ESP_Async_WebServer/examples/RequestContinuation/RequestContinuation.ino
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: LGPL-3.0-or-later
+// Copyright 2016-2025 Hristo Gochkov, Mathieu Carbou, Emil Muratov
+
+//
+// Shows how to use request continuation to pause a request for a long processing task, and be able to resume it later.
+//
+
+#include <Arduino.h>
+#ifdef ESP32
+#include <AsyncTCP.h>
+#include <WiFi.h>
+#elif defined(ESP8266)
+#include <ESP8266WiFi.h>
+#include <ESPAsyncTCP.h>
+#elif defined(TARGET_RP2040) || defined(TARGET_RP2350) || defined(PICO_RP2040) || defined(PICO_RP2350)
+#include <RPAsyncTCP.h>
+#include <WiFi.h>
+#endif
+
+#include <ESPAsyncWebServer.h>
+#include <list>
+#include <mutex>
+
+static AsyncWebServer server(80);
+
+// request handler that is saved from the paused request to communicate with Serial
+static String message;
+static AsyncWebServerRequestPtr serialRequest;
+
+// request handler that is saved from the paused request to communicate with GPIO
+static uint8_t pin = 35;
+static AsyncWebServerRequestPtr gpioRequest;
+
+void setup() {
+  Serial.begin(115200);
+
+#ifndef CONFIG_IDF_TARGET_ESP32H2
+  WiFi.mode(WIFI_AP);
+  WiFi.softAP("esp-captive");
+#endif
+
+  // Post a message that will be sent to the Serial console, and pause the request until the user types a key
+  //
+  // curl -v -X POST -H "Content-Type: application/x-www-form-urlencoded" -d "question=Name%3F%20" http://192.168.4.1/serial
+  //
+  // curl output should show "Answer: [y/n]" as the response
+  server.on("/serial", HTTP_POST, [](AsyncWebServerRequest *request) {
+    message = request->getParam("question", true)->value();
+    serialRequest = request->pause();
+  });
+
+  // Wait for a GPIO to be high
+  //
+  // curl -v http://192.168.4.1/gpio
+  //
+  // curl output should show "GPIO is high!" as the response
+  server.on("/gpio", HTTP_GET, [](AsyncWebServerRequest *request) {
+    gpioRequest = request->pause();
+  });
+
+  pinMode(pin, INPUT);
+
+  server.begin();
+}
+
+void loop() {
+  delay(500);
+
+  // Check for a high voltage on the RX1 pin
+  if (digitalRead(pin) == HIGH) {
+    if (auto request = gpioRequest.lock()) {
+      request->send(200, "text/plain", "GPIO is high!");
+    }
+  }
+
+  // check for an incoming message from the Serial console
+  if (message.length()) {
+    Serial.printf("%s", message.c_str());
+    // drops buffer
+    while (Serial.available()) {
+      Serial.read();
+    }
+    Serial.setTimeout(10000);
+    String response = Serial.readStringUntil('\n');  // waits for a key to be pressed
+    Serial.println();
+    message = emptyString;
+    if (auto request = serialRequest.lock()) {
+      request->send(200, "text/plain", "Answer: " + response);
+    }
+  }
+}